Overview: The Schneider LXM32CD18N4 Motion Servo Drive is a high-performance solution engineered for precision motion control applications. As part of the Lexium 32 series, this advanced servo drive is designed to enhance the efficiency, accuracy, and reliability of industrial automation systems.
Key Features:
Technical Specifications:
Applications: The Schneider LXM32CD18N4 is ideal for a wide array of industrial applications where precision and reliability are paramount. Common applications include:
Benefits:
Conclusion: The Schneider LXM32CD18N4 Motion Servo Drive from the Lexium 32 series stands out as a high-performance solution for industrial automation. With its robust power rating, precision control, and energy efficiency, it is designed to meet the rigorous demands of modern manufacturing environments.
For more information or to request a quote, please contact us directly.
| range of product |
Lexium 32
|
|
|---|---|---|
| product or component type |
Motion servo drive
|
|
| device short name |
LXM32C
|
|
| format of the drive |
Book
|
|
| network number of phases |
Three phase
|
|
| [Us] rated supply voltage |
200...240 V (- 15...10 %)
380...480 V (- 15...10 %) |
|
| supply voltage limits |
170...264 V
323...528 V |
|
| supply frequency |
50/60 Hz (- 5...5 %)
|
|
| network frequency |
47.5...63 Hz
|
|
| EMC filter |
Integrated
|
|
| continuous output current |
6 A (f = 8 kHz)
|
|
| output current 3s peak |
18 A for 5 s
|
|
| maximum continuous power |
1500 W at 230 V
3300 W at 400 V |
|
| nominal power |
1.2 kW at 230 V (f = 8 kHz)
1.8 kW at 400 V (f = 8 kHz) |
|
| line current |
4.5 A, THDI of 165 % at 480 V, without line choke
7.2 A, THDI of 88 % at 380 V, with external line choke of 1 mH 6 A, THDI of 98 % at 480 V, with external line choke of 1 mH 6.2 A, THDI of 159 % at 380 V, without line choke |
| switching frequency |
8 kHz
|
|
|---|---|---|
| overvoltage category |
III
|
|
| leakage current |
<= 30 mA
|
|
| output voltage |
<= power supply voltage
|
|
| electrical isolation |
Between power and control
|
|
| type of cable |
Single-strand IEC cable (for θ = 50 °C) conductor material:
copper 90 °C ,wire insulation material: XLPE/EPR
|
|
| electrical connection |
Terminal cable 3 mm² AWG 12 (CN8)
Terminal cable 5 mm² AWG 10 (CN1) Terminal cable 5 mm² AWG 10 (CN10) |
|
| tightening torque |
0.5 N.m (CN8)
0.7 N.m (CN1) 0.7 N.m (CN10) |
|
| discrete input number |
2 safety
6 logic |
|
| discrete input type |
Logic (DI)
Safety (compliment of STO_A, compliment of STO_B) |
|
| sampling duration |
0.25 ms (ANA1+/ANA1-, ANA2+/ANA2-) for analog
0.25 ms (DI) for discrete |
|
| discrete input voltage |
24 V DC for logic
24 V DC for safety |
|
| discrete input logic |
Positive (compliment of STO_A, compliment of STO_B) at State 0:
< 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1
Positive (DI) at State 0: > 19 V at State 1: < 9 V conforming to EN/IEC 61131-2 type 1 Positive or negative (DI) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1 |
|
| response time |
<= 5 ms (compliment of STO_A, compliment of STO_B)
|
|
| discrete output number |
5
|
|
| discrete output type |
Logic (DO) 24 V DC
|
|
| discrete output voltage |
<= 30 V DC
|
|
| discrete output logic |
Positive or negative (DO) conforming to EN/IEC 61131-2
|
|
| contact bounce time |
<= 1 ms (compliment of STO_A, compliment of STO_B)
0.25 µs...1.5 ms (DI) |
|
| braking current |
50 mA
|
|
| analogue input number |
2
|
|
| response time on output |
250 µs (DO) discrete
|
|
| absolute accuracy error |
< +/- 0.5 %
|
|
| linearity error |
< +/- 0.1 %
|
|
| analogue input type |
Analog input (ANA1+/ANA1-, ANA2+/ANA2-), differential +/- 10 V
input impedance: >= 20 Ohm, resolution: 14 bits
|
|
| control signal type |
Pulse train output (PTO) RS422 <= 500 kHz <= 100 m
Pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (open collector) <= 10 kHz <= 1 m Pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (push-pull) <= 200 kHz <= 10 m Pulse/direction (P/D), A/B, CW/CCW RS422 <= 1000 kHz <= 100 m Servo motor encoder feedback |
|
| protection type |
Against reverse polarity :inputs signal
Against short-circuits :outputs signal |
|
| safety function |
STO (safe torque off), integrated
|
|
| safety level |
SIL 3 conforming to EN/IEC 61508
PL = e conforming to ISO 13849-1 |
|
| communication interface |
Integrated Modbus
|
|
| connector type |
RJ45 (labelled CN7) :Modbus
|
|
| commissioning port |
2-wire RS485 multidrop Modbus
|
|
| transmission rate |
9600, 19200, 38400 bps for bus length of 40 m Modbus
|
|
| number of addresses |
Modbus
|
|
| status LED |
1 LED (red) servo drive voltage
|
|
| signalling function |
Display of faults in 7 segments
|
|
| marking |
CE
|
|
| operating position |
Vertical +/- 10 degree
|
|
| product compatibility |
Servo motor BMH (70 mm, 3 motor stacks)
Servo motor BMH (100 mm, 1 motor stacks) Servo motor BMH (100 mm, 2 motor stacks) Servo motor BSH (70 mm, 3 motor stacks) Servo motor BSH (100 mm, 1 motor stacks) Servo motor BSH (100 mm, 2 motor stacks) |
|
| width |
48 mm
|
|
| height |
270 mm
|
|
| depth |
237 mm
|
|
| product weight |
2 kg
|
| electromagnetic compatibility |
Conducted EMC at class A group 1 conforming to EN 55011
Conducted EMC at class A group 2 conforming to EN 55011 Conducted EMC at environment 2 category C3 conforming to EN/IEC 61800-3 Conducted EMC at category C2 conforming to EN/IEC 61800-3 Conducted EMC at environments 1 and 2 conforming to EN/IEC 61800-3 Electrostatic discharge immunity test at level 3 conforming to EN/IEC 61000-4-2 Susceptibility to electromagnetic fields at level 3 conforming to EN/IEC 61000-4-3 1.2/50 µs shock waves immunity test at level 3 conforming to EN/IEC 61000-4-5 Electrical fast transient/burst immunity test at level 4 conforming to EN/IEC 61000-4-4 Radiated EMC at class A group 2 conforming to EN 55011 Radiated EMC at category C3 conforming to EN/IEC 61800-3 |
|
|---|---|---|
| standards |
EN/IEC 61800-5-1
EN/IEC 61800-3 |
|
| product certifications |
RoHS
CSA UL TÜV |
|
| IP degree of protection |
IP20 conforming to EN/IEC 60529
IP20 conforming to EN/IEC 61800-5-1 |
|
| vibration resistance |
1.5 mm peak to peak (f = 3...13 Hz) conforming to EN/IEC
60068-2-6
1 gn (f = 13...150 Hz) conforming to EN/IEC 60068-2-6 |
|
| shock resistance |
15 gn for 11 ms conforming to EN/IEC 60028-2-27
|
|
| pollution degree |
2 conforming to EN/IEC 61800-5-1
|
|
| environmental characteristic |
Classes 3C1 conforming to IEC 60721-3-3
|
|
| relative humidity |
Class 3K3 (5 to 85 %) without condensation conforming to IEC
60721-3-3
|
|
| ambient air temperature for operation |
0...50 °C conforming to UL
|
|
| ambient air temperature for storage |
-25...70 °C
|
|
| type of cooling |
Integrated fan
|
|
| operating altitude |
<= 1000 m without derating
> 1000...3000 m with conditions |
There are no reviews for this product.