Product Overview
Elevate your motion control solutions with the Panasonic MINAS A6 Family MDMF152L1G6M Servo Motor. Engineered for precision and reliability, this 200V 1500W servo motor is designed to meet the demanding requirements of modern industrial automation. It integrates advanced technologies and superior build quality to ensure exceptional performance in a wide range of applications.
Key Features
Technical Specifications
Applications
The Panasonic MINAS A6 MDMF152L1G6M Servo Motor is designed for a wide range of applications including:
Why Choose Panasonic MINAS A6?
Panasonic’s MINAS A6 series represents the pinnacle of servo motor technology, combining advanced engineering with exceptional reliability. The MDMF152L1G6M is a testament to Panasonic’s commitment to delivering high-performance solutions that meet the evolving needs of industrial automation.
Spec Detail
| Item | Specifications |
|---|---|
| Part Number | MDMF152L1G6M |
| Details | Middle inertia, Connector type |
| Family Name | MINAS A6 |
| Series | MDMF Series |
| Type | Middle inertia |
| Special Order Product | Special Order Product |
| Cautions for Special ordering product | Please avoid the motor, or equipment containing the motor to be distributed to Japan, or other regions through Japan. |
| Enclosure | IP67 |
| About Enclosure | Except rotating portion of output shaft and connecting pin part of the motor connector and the encoder connector. |
| Environmental Conditions | For more details, please refer to the instruction manual. |
| Flange sq. dimension | 130 mm sq. |
| Flange sq. dimension (Unit:mm) | 130 |
| Motor lead-out configuration | Connector |
| Motor encoder connector | Motor connector: JL10, Encoder connector: Large size JL10 |
| About Motor encoder connector | Connector JL10 (Large size): Also applicable to screwed type |
| Power supply capacity (kVA) | 2.9 |
| Voltage specifications | 200 V |
| Rated output | 1500 W |
| Rated current (A (rms)) | 8.0 |
| Holding brake | without |
| Mass (kg) | 5.7 |
| Oil seal | with |
| Shaft | Key-way |
| Rated torque (N ⋅ m) | 7.16 |
| Continuous stall torque (N ⋅ m) | 7.52 |
| Momentary Max. peak torque (N ⋅ m) | 21.5 |
| Max. current (A (o-p)) | 34 |
| Regenerative brake frequency (times/min) | Without option :No limit With option :No limit Option (External regenerative resistor) Part No. : DV0P4284 |
| About regenerative brake frequency | Please refer to the details of [Motor Specification Description] , Note: 1, and 2. |
| Rated rotational speed (r/min) | 2000 |
| Rated rotational Max. speed (r/min) | 3000 |
| Moment of inertia of rotor ( x10-4 kg ⋅ m²) | 9.16 |
| Recommended moment of inertia ratio of the load and the rotor | 10 times or less |
| About recommended moment of inertia ratio of the load and the rotor | Please refer to the details of [Motor Specification Description] ,Note: 3. |
| Rotary encoder: specifications | 23-bit Absolute/Incremental system |
| Notice | When using a rotary encoder as an incremental system (not using multi-turn data), do not connect a battery for absolute encoder. |
| Rotary encoder: Resolution | 8388608 |
| Item | Specifications |
|---|---|
| During assembly: Radial load P-direction (N) | 980 |
| During assembly: Thrust load A-direction (N) | 588 |
| During assembly: Thrust load B-direction (N) | 686 |
| During operation: Radial load P-direction (N) | 490 |
| During operation: Thrust load A, B-direction (N) | 196 |
| About permissible load | For details, refer to the [Motor Specification Description] "Permissible Load at Output Shaft". |
There are no reviews for this product.