The Panasonic MINAS A6 MDMF752L1C6M Servo Motor represents the pinnacle of precision engineering and reliability in motion control systems. Designed for industrial applications demanding utmost performance, this servo motor stands as a hallmark of Panasonic's commitment to quality and innovation.
Operating at 200V with an impressive power output of 7500W, this servo motor delivers exceptional torque and speed capabilities. Its robust design ensures high endurance and optimal performance even under demanding operational conditions. The advanced technology within ensures seamless motion control, facilitating precise and efficient operation across various industrial applications.
The MINAS A6 MDMF752L1C6M Servo Motor integrates cutting-edge technology to guarantee accuracy and consistency in motion control. Its high-resolution feedback system coupled with advanced algorithms enables precise positioning and rapid response times, meeting the most stringent application requirements.
This servo motor finds its application in various industries, including but not limited to:
For SEO optimization, the following keywords are relevant:
Incorporating these keywords strategically throughout your content can enhance its visibility and ranking on search engines, ensuring your product reaches the right audience.
| Item | Specifications |
|---|---|
| Part Number | MDMF752L1C6M |
| Details | Middle inertia, Connector type |
| Family Name | MINAS A6 |
| Series | MDMF Series |
| Type | Middle inertia |
| Special Order Product | Special Order Product |
| Cautions for Special ordering product | Please avoid the motor, or equipment containing the motor to be distributed to Japan, or other regions through Japan. |
| Enclosure | IP67 |
| About Enclosure | Except rotating portion of output shaft and connecting pin part of the motor connector and the encoder connector. |
| Environmental Conditions | For more details, please refer to the instruction manual. |
| Flange sq. dimension | 176 mm sq. |
| Flange sq. dimension (Unit:mm) | 176 |
| Motor lead-out configuration | Connector |
| Motor encoder connector | Motor connector: JL04V, Encoder connector: Large size JL10 |
| Power supply capacity (kVA) | 11.0 |
| Voltage specifications | 200 V |
| Rated output | 7500 W |
| Rated current (A (rms)) | 40.2 |
| Holding brake | without |
| Mass (kg) | 27.8 |
| Oil seal | with |
| Shaft | Round |
| Rated torque (N ⋅ m) | 47.8 |
| Continuous stall torque (N ⋅ m) | 47.8 |
| Momentary Max. peak torque (N ⋅ m) | 125 |
| Max. current (A (o-p)) | 154 |
| Regenerative brake frequency (times/min) | Without option :No limit With option :No limit Option (External regenerative resistor) Part No. : DV0P4285 x 3 in parallel |
| Rated rotational speed (r/min) | 1500 |
| Rated rotational Max. speed (r/min) | 3000 |
| Moment of inertia of rotor ( x10-4 kg ⋅ m²) | 122 |
| Recommended moment of inertia ratio of the load and the rotor | 10 times or less |
| About recommended moment of inertia ratio of the load and the rotor | Please refer to the details of [Motor Specification Description] ,Note: 3. |
| Rotary encoder: specifications | 23-bit Absolute/Incremental system |
| Notice | When using a rotary encoder as an incremental system (not using multi-turn data), do not connect a battery for absolute encoder. |
| Rotary encoder: Resolution | 8388608 |
| Item | Specifications |
|---|---|
| During assembly: Radial load P-direction (N) | 2058 |
| During assembly: Thrust load A-direction (N) | 980 |
| During assembly: Thrust load B-direction (N) | 1176 |
| During operation: Radial load P-direction (N) | 1176 |
| During operation: Thrust load A, B-direction (N) | 490 |
| About permissible load | For details, refer to the [Motor Specification Description] "Permissible Load at Output Shaft". |
There are no reviews for this product.