Elevate Your Automation with Precision and Power
Unlock unparalleled performance and reliability with the Panasonic MINAS A6 Family MHMF082L1D4 Servo Motor. Engineered for high-efficiency motion control, this advanced 750W servo motor operates at 200V, delivering robust power and exceptional precision for a wide range of industrial applications.
Key Features:
Technical Specifications:
Applications:
The Panasonic MINAS A6 Family MHMF082L1D4 Servo Motor is ideal for a variety of automation and control applications, including:
Why Choose Panasonic MINAS A6?
Panasonic’s MINAS A6 series represents the pinnacle of servo motor technology, combining precision engineering with cutting-edge features to deliver unmatched performance and reliability. Whether you are upgrading existing systems or designing new automation solutions, the MHMF082L1D4 offers the versatility, efficiency, and power needed to drive your success.
Contact Us Today
For more information about the Panasonic MINAS A6 Family MHMF082L1D4 Servo Motor or to discuss your specific requirements, please contact our sales team. Experience the excellence of Panasonic engineering and take your automation to the next level.
Spec Detail
| Item | Specifications |
|---|---|
| Part Number | MHMF082L1D4 |
| Details | High inertia, Lead wire type |
| Family Name | MINAS A6 |
| Series | MHMF Series |
| Type | High inertia |
| Enclosure | IP65 |
| About Enclosure | Except rotating portion of output shaft and leadwire end. |
| Environmental Conditions | For more details, please refer to the instruction manual. |
| Flange sq. dimension | 80 mm sq. |
| Flange sq. dimension (Unit:mm) | 80 |
| Motor lead-out configuration | Lead wire |
| Motor encoder connector | Lead wire |
| Power supply capacity (kVA) | 1.8 |
| Voltage specifications | 200 V |
| Rated output | 750 W |
| Rated current (A (rms)) | 3.8 |
| Holding brake | with |
| Mass (kg) | 3.1 |
| Oil seal | with protective lip |
| Shaft | Round |
| Rated torque (N ⋅ m) | 2.39 |
| Continuous stall torque (N ⋅ m) | 2.86 |
| Momentary Max. peak torque (N ⋅ m) | 8.36 |
| Max. current (A (o-p)) | 18.8 |
| Regenerative brake frequency (times/min) | Without option :No limit With option :No limit Option (External regenerative resistor) Part No. : DV0P4283 |
| About regenerative brake frequency | Please refer to the details of [Motor Specification Description] , Note: 1, and 2. |
| Rated rotational speed (r/min) | 3000 |
| Rated rotational Max. speed (r/min) | 6000 |
| Moment of inertia of rotor ( x10-4 kg ⋅ m²) | 1.66 |
| Recommended moment of inertia ratio of the load and the rotor | 20 times or less |
| About recommended moment of inertia ratio of the load and the rotor | Please refer to the details of [Motor Specification Description] ,Note: 3. |
| Rotary encoder: specifications | 23-bit Absolute/Incremental system |
| Notice | When using a rotary encoder as an incremental system (not using multi-turn data), do not connect a battery for absolute encoder. |
| Rotary encoder: Resolution | 8388608 |
| Item | Specifications |
|---|---|
| Static friction torque (N ⋅ m) | 3.8 or more |
| Engaging time (ms) | 70 or less |
| Releasing time (ms) | 20 or less |
| Exciting current (DC) (A) | 0.42 |
| Releasing voltage (DC) (V) | 1 or more |
| Exciting voltage (DC) (V) | 24 ± 2.4 |
| About brake specifications | This brake will be released when it is energized. Do not use this for braking the motor in motion. Please refer to the details of [Motor Specification Description] , "Specifications of Built-in Holding Brake" and "Notes on [Motor specification] page, Note: 4. |
| Item | Specifications |
|---|---|
| During assembly: Radial load P-direction (N) | 686 |
| During assembly: Thrust load A-direction (N) | 294 |
| During assembly: Thrust load B-direction (N) | 392 |
| During operation: Radial load P-direction (N) | 392 |
| During operation: Thrust load A, B-direction (N) | 147 |
| About permissible load | For details, refer to the [Motor Specification Description] "Permissible Load at Output Shaft". |
There are no reviews for this product.