Elevate your automation systems with the Panasonic MINAS A6 Family MHMF102L1D6M Servo Motor, a pinnacle of precision and performance in motion control technology. Designed for high-efficiency and reliability, this 200V 1000W servo motor is engineered to meet the demands of sophisticated industrial applications, providing superior torque, speed, and accuracy.
The Panasonic MINAS A6 Family MHMF102L1D6M Servo Motor is ideal for a wide range of applications, including but not limited to:
Panasonic’s MINAS A6 series is renowned for its technological advancements and reliability. With a commitment to excellence, Panasonic delivers servo motors that not only meet but exceed industry standards. The MHMF102L1D6M is a testament to this commitment, offering unparalleled performance and durability.
Experience the next level of motion control with the Panasonic MINAS A6 Family MHMF102L1D6M Servo Motor. Contact us today to place your order or to learn more about how this high-performance motor can enhance your systems.
Keywords: Panasonic MINAS A6, MHMF102L1D6M Servo Motor, 200V Servo Motor, 1000W Servo Motor, Precision Servo Motor, Industrial Automation, High Torque Servo Motor, Motion Control Technology
Spec Detail
| Item | Specifications |
|---|---|
| Part Number | MHMF102L1D6M |
| Details | High inertia, Connector type |
| Family Name | MINAS A6 |
| Series | MHMF Series |
| Type | High inertia |
| Special Order Product | Special Order Product |
| Cautions for Special ordering product | Please avoid the motor, or equipment containing the motor to be distributed to Japan, or other regions through Japan. |
| Enclosure | IP67 |
| About Enclosure | Except rotating portion of output shaft and connecting pin part of the motor connector and the encoder connector. |
| Environmental Conditions | For more details, please refer to the instruction manual. |
| Flange sq. dimension | 130 mm sq. |
| Flange sq. dimension (Unit:mm) | 130 |
| Motor lead-out configuration | Connector |
| Motor encoder connector | Motor connector: JL10, Encoder connector: Large size JL10 |
| About Motor encoder connector | Connector JL10 (Large size): Also applicable to screwed type |
| Power supply capacity (kVA) | 2.4 |
| Voltage specifications | 200 V |
| Rated output | 1000 W |
| Rated current (A (rms)) | 5.2 |
| Holding brake | with |
| Mass (kg) | 7.6 |
| Oil seal | with |
| Shaft | Round |
| Rated torque (N ⋅ m) | 4.77 |
| Continuous stall torque (N ⋅ m) | 5.25 |
| Momentary Max. peak torque (N ⋅ m) | 14.3 |
| Max. current (A (o-p)) | 22 |
| Regenerative brake frequency (times/min) | Without option :No limit With option :No limit Option (External regenerative resistor) Part No. : DV0P4284 |
| About regenerative brake frequency | Please refer to the details of [Motor Specification Description] , Note: 1, and 2. |
| Rated rotational speed (r/min) | 2000 |
| Rated rotational Max. speed (r/min) | 3000 |
| Moment of inertia of rotor ( x10-4 kg ⋅ m²) | 24.1 |
| Recommended moment of inertia ratio of the load and the rotor | 5 times or less |
| About recommended moment of inertia ratio of the load and the rotor | Please refer to the details of [Motor Specification Description] ,Note: 3. |
| Rotary encoder: specifications | 23-bit Absolute/Incremental system |
| Notice | When using a rotary encoder as an incremental system (not using multi-turn data), do not connect a battery for absolute encoder. |
| Rotary encoder: Resolution | 8388608 |
| Item | Specifications |
|---|---|
| Static friction torque (N ⋅ m) | 13.7 or more |
| Engaging time (ms) | 100 or less |
| Releasing time (ms) | 50 or less |
| Exciting current (DC) (A) | 0.79 ± 10 % |
| Releasing voltage (DC) (V) | 2 or more |
| Exciting voltage (DC) (V) | 24 ± 2.4 |
| About brake specifications | This brake will be released when it is energized. Do not use this for braking the motor in motion. Please refer to the details of [Motor Specification Description] , "Specifications of Built-in Holding Brake" and "Notes on [Motor specification] page, Note: 4. |
| Item | Specifications |
|---|---|
| During assembly: Radial load P-direction (N) | 980 |
| During assembly: Thrust load A-direction (N) | 588 |
| During assembly: Thrust load B-direction (N) | 686 |
| During operation: Radial load P-direction (N) | 490 |
| During operation: Thrust load A, B-direction (N) | 196 |
| About permissible load | For details, refer to the [Motor Specification Description] "Permissible Load at Output Shaft". |
There are no reviews for this product.