Panasonic MINAS A6 MHMF302L1D8 Servo Motor 200V 3000W
Introduction: The Panasonic MINAS A6 MHMF302L1D8 Servo Motor redefines precision and efficiency in industrial automation. Built to excel in demanding applications, this 200V, 3000W motor exemplifies unparalleled performance and reliability.
Key Features:
Technical Specifications:
Benefits:
Conclusion: The Panasonic MINAS A6 MHMF302L1D8 Servo Motor stands as a pinnacle of innovation and performance in the realm of servo motors. From its precision control to its durable construction, it empowers industries to achieve superior operational excellence, making it a cornerstone in the pursuit of efficiency and reliability.
Contact us today to integrate the MINAS A6 MHMF302L1D8 Servo Motor into your industrial setup and experience unmatched performance and precision.
| Item | Specifications |
|---|---|
| Part Number | MHMF302L1D8 |
| Details | High inertia, Connector type |
| Family Name | MINAS A6 |
| Series | MHMF Series |
| Type | High inertia |
| Enclosure | IP67 |
| About Enclosure | Except rotating portion of output shaft and connecting pin part of the motor connector and the encoder connector. |
| Environmental Conditions | For more details, please refer to the instruction manual. |
| Flange sq. dimension | 176 mm sq. |
| Flange sq. dimension (Unit:mm) | 176 |
| Motor lead-out configuration | Connector |
| Motor encoder connector | Motor connector: JL10, Encoder connector: Large size JL10 |
| About Motor encoder connector | Connector JL10 (Large size): Also applicable to screwed type |
| Power supply capacity (kVA) | 5.2 |
| Voltage specifications | 200 V |
| Rated output | 3000 W |
| Rated current (A (rms)) | 17.0 |
| Holding brake | with |
| Mass (kg) | 17.2 |
| Oil seal | with protective lip |
| Shaft | Round |
| Rated torque (N ⋅ m) | 14.3 |
| Continuous stall torque (N ⋅ m) | 17.2 |
| Momentary Max. peak torque (N ⋅ m) | 43.0 |
| Max. current (A (o-p)) | 72 |
| Regenerative brake frequency (times/min) | Without option :No limit With option :No limit Option (External regenerative resistor) Part No. : DV0P4285 x 2 in parallel |
| About regenerative brake frequency | Please refer to the details of [Motor Specification Description] , Note: 1, and 2. |
| Rated rotational speed (r/min) | 2000 |
| Rated rotational Max. speed (r/min) | 3000 |
| Moment of inertia of rotor ( x10-4 kg ⋅ m²) | 90.7 |
| Recommended moment of inertia ratio of the load and the rotor | 5 times or less |
| About recommended moment of inertia ratio of the load and the rotor | Please refer to the details of [Motor Specification Description] ,Note: 3. |
| Rotary encoder: specifications | 23-bit Absolute/Incremental system |
| Notice | When using a rotary encoder as an incremental system (not using multi-turn data), do not connect a battery for absolute encoder. |
| Rotary encoder: Resolution | 8388608 |
| Item | Specifications |
|---|---|
| Static friction torque (N ⋅ m) | 25.0 or more |
| Engaging time (ms) | 80 or less |
| Releasing time (ms) | 25 or less |
| Exciting current (DC) (A) | 1.29 ± 10 % |
| Releasing voltage (DC) (V) | 2 or more |
| Exciting voltage (DC) (V) | 24 ± 2.4 |
| About brake specifications | This brake will be released when it is energized. Do not use this for braking the motor in motion. Please refer to the details of [Motor Specification Description] , "Specifications of Built-in Holding Brake" and "Notes on [Motor specification] page, Note: 4. |
| Item | Specifications |
|---|---|
| During assembly: Radial load P-direction (N) | 1666 |
| During assembly: Thrust load A-direction (N) | 784 |
| During assembly: Thrust load B-direction (N) | 980 |
| During operation: Radial load P-direction (N) | 784 |
| During operation: Thrust load A, B-direction (N) | 343 |
| About permissible load | For details, refer to the [Motor Specification Description] "Permissible Load at Output Shaft". |
There are no reviews for this product.