The Panasonic MINAS A6 MSMF5AZA1B2 Servo Motor represents the pinnacle of precision and performance in industrial automation. Designed to meet the rigorous demands of advanced manufacturing environments, this servo motor offers exceptional reliability, efficiency, and control.
The Panasonic MINAS A6 MSMF5AZA1B2 Servo Motor is ideal for a wide range of applications, including:
Opt for the Panasonic MINAS A6 MSMF5AZA1B2 Servo Motor to leverage cutting-edge technology, superior performance, and unmatched reliability. Designed for the most demanding applications, this servo motor is your ideal choice for optimizing your automation processes and achieving unparalleled precision and efficiency.
For more information and to order the Panasonic MINAS A6 MSMF5AZA1B2 Servo Motor, please contact us or visit our website.
| Item | Specifications |
|---|---|
| Part Number | MSMF5AZA1B2 |
| Details | Low inertia, Lead wire type |
| Family Name | MINAS A6 |
| Series | MSMF Series |
| Type | Low inertia |
| Enclosure | IP65 |
| About Enclosure | Except rotating portion of output shaft and leadwire end. |
| Environmental Conditions | For more details, please refer to the instruction manual. |
| Flange sq. dimension | 38 mm sq. |
| Flange sq. dimension (Unit:mm) | 38 |
| Motor lead-out configuration | Lead wire |
| Motor encoder connector | Lead wire |
| Power supply capacity (kVA) | AC100 V : 0.4 kVA AC200 V : 0.5 kVA |
| Voltage specifications | 100 V/200 V common |
| Rated output | 50 W |
| Rated current (A (rms)) | 1.1 |
| Holding brake | with |
| Mass (kg) | 0.53 |
| Oil seal | without |
| Shaft | Round |
| Rated torque (N ⋅ m) | 0.16 |
| Continuous stall torque (N ⋅ m) | 0.16 |
| Momentary Max. peak torque (N ⋅ m) | 0.48 |
| Max. current (A (o-p)) | 4.7 |
| Regenerative brake frequency (times/min) | Without option :No limit With option :No limit Option (External regenerative resistor) Part No. : DV0P4280 (For AC100 V) , DV0P4281 (For AC200 V) |
| Rated rotational speed (r/min) | 3000 |
| Rated rotational Max. speed (r/min) | 6000 |
| Moment of inertia of rotor ( x10-4 kg ⋅ m²) | 0.029 |
| Recommended moment of inertia ratio of the load and the rotor | 30 times or less |
| About recommended moment of inertia ratio of the load and the rotor | Please refer to the details of [Motor Specification Description] ,Note: 3. |
| Rotary encoder: specifications | 23-bit Absolute/Incremental system |
| Rotary encoder: Resolution | 8388608 |
| Item | Specifications |
|---|---|
| Static friction torque (N ⋅ m) | 0.294 or more |
| Engaging time (ms) | 35 or less |
| Releasing time (ms) | 20 or less |
| Exciting current (DC) (A) | 0.30 |
| Releasing voltage (DC) (V) | 1 or more |
| Exciting voltage (DC) (V) | 24 ± 1.2 |
| About brake specifications | This brake will be released when it is energized. Do not use this for braking the motor in motion. Please refer to the details of [Motor Specification Description] , "Specifications of Built-in Holding Brake" and "Notes on [Motor specification] page, Note: 4. |
| Item | Specifications |
|---|---|
| During assembly: Radial load P-direction (N) | 147 |
| During assembly: Thrust load A-direction (N) | 88.0 |
| During assembly: Thrust load B-direction (N) | 117.6 |
| During operation: Radial load P-direction (N) | 68.6 |
| During operation: Thrust load A, B-direction (N) | 58.8 |
| About permissible load | For details, refer to the [Motor Specification Description] "Permissible Load at Output Shaft". |
There are no reviews for this product.