Schneider ATS01N209QN Soft Starter for Asynchronous Motor
Product Description
Schneider ATS01N209QN Soft Starter for Asynchronous Motors
Overview: The Schneider ATS01N209QN Soft Starter is engineered to provide superior control and protection for asynchronous motors in a variety of industrial applications. This advanced soft starter is designed to enhance the performance of your motor by reducing inrush current and mechanical stress during startup and shutdown, ensuring smoother operation and prolonged equipment life.
Key Features:
Advanced Soft Starting Technology: The ATS01N209QN utilizes state-of-the-art soft starting technology to gradually ramp up motor speed, minimizing mechanical and electrical stress. This ensures a smooth start-up and reduces the risk of damage to both the motor and connected machinery.
Optimized Motor Protection: With built-in protection features, including overcurrent, under-voltage, and phase loss detection, this soft starter safeguards your motor against potential faults. The device also includes thermal protection to prevent overheating, ensuring reliable operation in demanding environments.
Flexible Configuration: The ATS01N209QN offers adjustable starting and stopping ramps, allowing for precise control over motor acceleration and deceleration. This flexibility helps to accommodate various application needs and improve overall system performance.
Compact and Robust Design: Designed for ease of installation and durability, the Schneider ATS01N209QN features a compact form factor that fits seamlessly into control panels. Its robust construction ensures reliable performance even in harsh industrial conditions.
User-Friendly Interface: Equipped with a clear and intuitive interface, this soft starter allows for straightforward setup and configuration. Users can easily access and adjust parameters to tailor the soft starter’s performance to specific application requirements.
Energy Efficiency: By reducing the inrush current and optimizing motor performance, the ATS01N209QN contributes to energy savings and lower operational costs. This makes it an excellent choice for applications where energy efficiency and cost-effectiveness are key considerations.
Technical Specifications:
- Model: Schneider ATS01N209QN
- Type: Soft Starter
- Motor Type: Asynchronous Motor
- Starting Method: Soft Start
- Voltage Range: [Insert specific voltage range here]
- Current Rating: [Insert specific current rating here]
- Protection Features: Overcurrent, Under-voltage, Phase Loss, Thermal Protection
- Adjustable Parameters: Starting Ramp, Stopping Ramp
- Mounting: [Insert mounting type and dimensions here]
- Operating Temperature Range: [Insert temperature range here]
- Dimensions: [Insert dimensions here]
- Weight: [Insert weight here]
Applications:
- Industrial Automation
- HVAC Systems
- Pumps and Fans
- Conveyor Systems
- Compressors
Why Choose Schneider ATS01N209QN?
The Schneider ATS01N209QN Soft Starter stands out for its superior performance, reliability, and ease of use. Its advanced features and robust design make it an ideal choice for a wide range of industrial applications, ensuring efficient motor control and protection. Invest in the Schneider ATS01N209QN to enhance your motor operations and achieve optimal performance.
Contact Us:
For more information or to request a quote, please contact our sales team
| range of product |
Altistart 01
|
|
|---|---|---|
| product or component type |
Soft starter
|
|
| product destination |
Asynchronous motors
|
|
| product specific application |
Simple machine
|
|
| device short name |
ATS01
|
|
| network number of phases |
3 phases
|
|
| [Us] rated supply voltage |
380...415 V - 10...10 %
|
|
| motor power kW |
4 kW 3 phases 380...415 V
|
|
| IcL starter rating |
9 A
|
|
| utilisation category |
AC-53B EN/IEC 60947-4-2
|
|
| current consumption |
45 A at nominal load
|
|
| type of start |
Start with voltage ramp
|
|
| power dissipation in W |
4 W at full load and at end of starting
94 W in transient state |
| assembly style |
With heat sink
|
|
|---|---|---|
| function available |
Integrated bypass
|
|
| supply voltage limits |
342...456 V
|
|
| supply frequency |
50...60 Hz - 5...5 %
|
|
| network frequency |
47.5...63 Hz
|
|
| output voltage |
<= power supply voltage
|
|
| [Uc] control circuit voltage |
Built into the starter
|
|
| starting time |
1 s 100
10 s 10 5 s 20 Adjustable from 1 to 10 s |
|
| deceleration time symb |
Adjustable from 1 to 10 s
|
|
| starting torque |
30...80 % of starting torque of motor connected directly on the
line supply
|
|
| discrete input type |
Logic LI1, LI2, BOOST stop, run and boost on start-up functions
<= 8 mA 27 kOhm
|
|
| discrete input voltage |
24...40 V
|
|
| discrete input logic |
Positive LI1, LI2, BOOST < 5 V and <= 0.2 mA > 13 V >= 0.5 mA
|
|
| discrete output current |
2 A DC-13
3 A AC-15 |
|
| discrete output type |
Open collector logic LO1 end of starting signal
Relay outputs R1A, R1C NO |
|
| discrete output voltage |
24 V 6...30 V open collector logic
|
|
| minimum switching current |
10 mA 6 V DC relay outputs
|
|
| maximum switching current |
2 A 250 V AC inductive cos phi = 0.5 20 ms relay outputs
2 A 30 V DC inductive cos phi = 0.5 20 ms relay outputs |
|
| display type |
1 LED green starter powered up
1 LED yellow nominal voltage reached |
|
| tightening torque |
0.5 N.m
1.9...2.5 N.m |
|
| electrical connection |
4 mm screw clamp terminal rigid 1 1...10 mm² AWG 8 power circuit
Screw connector rigid 1 0.5...2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal rigid 2 1...6 mm² AWG 10 power circuit Screw connector rigid 2 0.5...1 mm² AWG 17 control circuit Screw connector flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit 4 mm screw clamp terminal flexible without cable end 1 1.5...10 mm² AWG 8 power circuit Screw connector flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal flexible with cable end 2 1...6 mm² AWG 10 power circuit 4 mm screw clamp terminal flexible without cable end 2 1.5...6 mm² AWG 10 power circuit Screw connector flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit |
|
| marking |
CE
|
|
| operating position |
Vertical +/- 10 degree
|
|
| height |
124 mm
|
|
| width |
45 mm
|
|
| depth |
131 mm
|
|
| product weight |
0.42 kg
|
|
| compatibility code |
ATS01N2
|
|
| Motor power range AC-3 |
4...6 kW at 380...440 V 3 phases
|
|
| motor starter type |
Soft starter
|
When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.
The total time it takes to receive your order is shown below:
The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.
Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.
Shipping from your local warehouse is significantly faster. Some charges may apply.
In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!
